Hi.

This is Windows-XP SP2 to OpenSUSE 10.3 replication.!!
http://winpg.jp/~saito/Slony-I-sample/WindowsToOpenSUSE/
It should prove that what it is satisfactory.:-)

Regards,
Hiroshi Saito

----- Original Message ----- 
From: "Hiroshi Saito" <z-saito at guitar.ocn.ne.jp>
> Hi.
>
> Did you try the following?
> --
> Um, There was the before same report. However, The problem was not reproduced in the
> environment of Dave with me. It was very strange. So, I wish to check one.
> Here is a new version.
> http://developer.pgadmin.org/~hiroshi/Slony-I/
> And if a problem still reappears, please use this. (This is VC8 compile module)
> http://developer.pgadmin.org/~hiroshi/Slony-I/slevent.dll
> MinGW (GCC) will be suspected if it operates well.
> --
>
> Regards,
> Hiroshi Saito
>
> ----- Original Message ----- 
> From: Andrew Hammond
> To: Walter Coole
> Cc: Hiroshi Saito ; slony1-general at lists.slony.info
> Sent: Wednesday, November 14, 2007 6:32 AM
> Subject: Re: [Slony1-general] Windows as master, Linux as slave
>
>
> On Nov 13, 2007 12:54 PM, Walter Coole <WCoole at aperiogroup.com> wrote:
>
> I got slony for the Linux hosts from from slony1-1.2.10.tar, the Windows hosts from 
> slony-I-1.2.11R-pg82.zip , so that might be the problem.
> Well, that's not gonna work. :)
>
> I tried installing PostgeSQL 8.2.4 and slony-I-1.2.10R-pg82 on a new Windows host (not 
> previously installed with PostgreSQL or Slony) and got the same "Module C:\Program 
> Files\PostgreSQL\8.2\lib\slevent.dll failed to register. HRESULT -2147023898.  Contact 
> your support personnel." error.
> I don't know enough about the windows install to help you with this, but Hiroshi probably 
> can. Saito-san?
> I tried changing the selected features and this error happens if (and only if) I select 
> the feature "Slony-I server module".  Guessing by the name, I think I need this feature.
> I suspect this is talking about the slons. In which case, you don't need to run a slon on 
> the windows machine. You can run both slons on the linux box. However I would suggest that 
> you run the slons for each machine from the machine it is managing (unless you have 
> dedicated management servers on the same LAN, in which case, run them there).
>
> As an experiment, I tried installing the various versions from 
> http://developer.pgadmin.org/~hiroshi/Slony-I/
> I assume that you already know this but I'll reiterate to be sure: please do not run 
> ancient versions of the software. You are almost always better off running the latest 
> 1.2.x release since there are very few features being added to 1.2 anymore, but plenty of 
> bug-fixes have gone in.
>
> Andrew
> _______________________________________________
> Slony1-general mailing list
> Slony1-general at lists.slony.info
> http://lists.slony.info/mailman/listinfo/slony1-general